The PAC H63C JD 173HP T4F for high-pressure applications, have been designed to reduce downtime and prolong lifespan, saving operational costs.
This centrifugal pump can handle liquids containing solids of up to 3" in size. This makes it particularly well suited to industrial applications, such as water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the enclosed impeller, the PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency.
| Pump | |
|---|---|
| Model | PAC H63 |
| Qmax | 1,100 USgpm |
| Hmax | 460 ft |
| Q max eff. | 1,240 USgpm |
| Eff. max | 66 % |
| Suction port | 6" Flange - ANSI class 150 |
| Delivery port | 3" Flange - ANSI class 80 |
| Impeller type | Enclosed, 4 vane |
| Impeller diameter | 17" |
| Solids handling | 0.75" |
| Material | |
| Casing | ASTM A536 ductile iron |
| Impeller | ASTM A743 CA6NM |
| Wear ring | ASTM A48 Class 20 grey iron |
| Wear plate | ASTM A48 Class 20 Grey Iron + NBR rubber coating |
| Shaft | AISI 630 stainless steel |
| Mechanical Seal faces | Silicon carbide Vs Silicon carbide |
| Elastomers | VITON |
| Check Valve | ASTM A536 ductile iron + NBR rubber flap |
| Separator | Fabricated Steel |
| Priming System | |
| Vacuum pump | |
| Vacuum pump type | Diaphragm |
| Nominal air capacity | 50.0 cfm |
| Max vacuum | - 26.6 inHg |
| Drives | Link belt |
| Engine | |
|---|---|
| Make | John Deere |
| Model | 4045HFC06 |
| Type | Diesel turbo common rail |
| Displacement | 275 in³ |
| No. cylinders | 4 |
| Cooling | Liquid with radiator |
| Rpm type | Variable |
| Max operating speed | 2100 rpm |
| US emissions | EPA Tier 4F |
| Starting | Electric |
| Engine system voltage | 12 V |
| Engine Power rating | 173 HP |
| Control panel | |
| Model | PW 1000 |
| Manual operation | |
| Automatic operation: start-stop with transducers or floats | |
| MC4+ Telematics | |
| Arrangement | |
| Technical data | |
| Material | ASTM A36 steel |
| Coatings | Epoxy powder, average thickness of 3 MIL |
| Features | Lifting beam. hinge door. Protected PE fuel tank |
| Battery | Acid charge Pb-Ca maintenance free, 12V - 1150 CCA |
| Fuel tank capacity | 173 USG |
| DEF tank capacity | 9.2 USG |
| Fuel consumption | 7.8 US Gal/hr @2,100rpm |
| Dry weight | 7,213 lbs |
| Wet weight | 8,763 lbs |
| Speed | Impeller Dia. | Style | Solids Dia. | Ns | Suction | Discharge | No. Vanes |
| Various | 17" / 440 mm | Enclosed | 0.75" / 20 mm | 2,100 rpm | 6" / 150 mm | 3" / 80 mm | 4 |
| Efficiency The 17" impeller with 69% efficiency at B.E.P. provides best pumping result with minimal efforts |
Easy Maintenance Hinged cover for direct access to the impeller and pump volute |
Foot print Best in class foot print for the transport of 3x PAC H63C pumps on same trailer. |
Serviceability Semi cartridge seal and bolted front wear ring for easy service |
Polyethylene Fuel tank Corrosion-free PE tank provides longer lifetime and avoids tank cleaning due to oxidation |
Site dewatering is the process of taking and removing water from construction sites, quarries, mine shafts, or any other area. Extracting water from these areas is crucial to maintain a safe working environment as well as reduce any costly delays.
Due to the PAC's ability to handle pumping high volumes, this pump is able to displace not only water, but sewage, industrial waste, chemicals, and even some solid products.
Areas for site dewatering :
Bypass pumping involves maneuvering liquid (sewage, trash, water, etc.) around a damaged pipe without interrupting the flow of liquid while the repairs are underway. This process is critical for many rehab projects, as it allows for a pipe to be repaired or replaced without spillage on public or private property.
Bypass pumping uses a PAC H, which is a centrifugal pump that can handle liquids containing solids of up to 3 inches. Because of this, the PAC H pump is well suited for bypassing in construction, industrial, and municipal applications.
Bypass is common in these sectors:
Water transfer refers to the moving of water from one location to another, often to support hydraulic fracturing. The PAC H is a centrifugal pump that can handle heads up to 3", which makes it well suited for water transfer in the oil and gas sector, quarrying and surface mining, construction, and municipal applications.
The PAC H pump's design benefits make them well suited for water transfer. These pumps are able to be used often and on jobs where pumps must run continuously.
Water transfer is most common in the oil and gas sector.