The Atlas Copco E-Air V1100 VSD is a single-stage, oil-injected, rotary screw type air compressor, powered by a Danfoss electric motor with Class F insulation The E-Air VSD compressor is a game changer when it comes to performance, energy-efficiency and versatility.
The unit hosts the new generation Screw element in its air end combined with a Danfoss integrated permanent magnet motor, cooling circuit, air/oil separation and control systems.
Special attention has been given to the overall product quality, user friendliness, ease of serviceability, and economical operation, to ensure best in class cost of ownership.
The unique feature of this new range is the PACE functionality coupled with the intuitive XC4004 controller. This pioneering technology enables multiple pressure and flow settings, ensuring you match air flow and pressure to your application needs.
Standard instrument package includes an operating pressure gauge, and fully diagnostic ECU controller with large display. The intuitive Atlas Copco XC4004 controller is easy to operate with all functions conveniently at your fingertips. The controller also manages the motor operating system, and a number of safety warnings and shut downs on various parameters (listed below).
Easy to use interface
• 7 inch anti-glare LED screen.
• Simultaneous view of pressure and flow increase control on the output flow required by your application.
• Personalized interaction through metrics and language settings.
Powerful insights increase uptime
• Easy access to trends of 15 parameters.
• Increase uptime through preventative maintenance
Save time through remote controlling
• Mirror application: control feed air compressor through second controller at point of use.
• All machine parameters remotely adjustable: ECOmode, Dynamic Flow Boost, multi pressure / flow settings, emergency stop...
• Hard wired or RRC (radio remote connection)
| Model | E-Air V1100 VSD | |
| Minimum effective receiver pressure | psi(g) | 72.5 |
| Maximum effective receiver pressure (Unloaded) | psi(g) | 203 |
| Free air delivery | ||
| at pressure setting 203 psi | cfm | 794.6 |
| at pressure setting 175 psi | cfm | 894.2 |
| at pressure setting 150 psi | cfm | 985.3 |
| at pressure setting of 125 psi | cfm | 1061.6 |
| at pressure setting of 100 psi | cfm | 1154.8 |
| at pressure setting of 72.5 psi | cfm | 1286.2 |
| Max. sound pressure level (Lp @ ISO 2151) | dB(A) | 72 |
| Compressed air temperature at outlet valve with aftercooler | °C (°F) | Amb. +15°C (Amb. +59°F) |
| Max. ambient temperature at sea level | °C (°F) | 50 (122) |
| Max. ambient temperature at sea level with aftercooler | °C (°F) | 45 (113) |
| Min. starting temperature with cold weather equipment | °C (°F) | -25 (-13) |
| Min. starting temperature without cold weather equipment | °C (°F) | <-25 (<-13) |
| Max. oil content of compressed air (w/o UD Filter) | mg/m3 | 2.7 |
| Number of compression stages | 1 | |
| Capacity of compressor oil system | US Gal (l) | 19 (72) |
| Net capacity of air receiver | US Gal (l) | 47.55 (180) |
| Air volume at inlet grating (approx.) | ft3/s | 406.1 |
| Motor |
|
|
| Installed motor power | hp (kW) | 280 (208) |
| Voltage | V | 380-460 (+/- 10%) |
| Current | A | 350 |
| Fan(s) electrical power input | hp (kW) | 10 (7.5) |
| Frequency | Hz | 50-60 |
| Number of phases | 3 |
Shotcrete, gunite, or sprayed concrete becomes an easier task when the materials are pushed through a hose and pneumatically projected at high velocity onto a surface using our air compressors. Whether you're doing road work, building a pool or laying concrete, our range of compressors can get the job done.
Pneumatic Directional boring refers to smaller-diameter bores over shorter distances while horizontal directional drilling, or HDD, indicates larger diameters and longer distances.
PDB and HDD are trenchless technologies that use surface-launched equipment to drill underground horizontally and install pipes, conduits, and cables. These processes can be air-driven and are used in numerous industries, such as utilities and telecommunications, at sites in dense, urban areas and/or where traditional vertical excavations are too dangerous (e.g., under bodies of water).
Sandblasters are used to clean difficult substances like rust or paint from solid surfaces like metal. In order to choose the correct compressor unit for sandblasting it is important to understand that the compressor doesn’t simply provide a single burst of air. It must sustain the pressure needed for the specific equipment and operation. The compressor needs to have the right air volume. Too little and it won’t be able to keep up with your job, too much and you've overspent.
