Preventing compressed air breakdowns in tough manufacturing
December 2, 2025
In demanding manufacturing environments, such as metalworking, chemical processing, and general manufacturing, compressed air systems are essential. They power tools and machines, control automation, support material handling, and ensure safety systems function properly. But when these systems fail, the consequences can be costly and disruptive.
How to choose the right compressed air equipment for demanding industrial and manufacturing applications
December 2, 2025
In demanding industrial and manufacturing environments, compressed air is more than just a utility. It’s a critical component of production processes. Whether you're powering pneumatic machines or tools, controlling automation systems, or ensuring product integrity, the reliability and efficiency of your compressed air system directly impact your bottom line.
Is your environment hurting your equipment? How real-world conditions redefine compressor reliability
December 2, 2025
Factories rarely operate in clean and sterile conditions. Dust, humidity and heat all affect how machines perform, and compressed air systems are no exception. While some compressors work safely in clean, climate-controlled rooms, many operate directly on the production floor or outdoors, where conditions are less predictable. Yet in many industries, frequent equipment breakdowns leading to downtime are still accepted as routine, even when the environment is clearly putting stress on the equipment. This raises an important question for operators: is the workplace itself accelerating wear without them realizing it? And although some facilities keep separate compressor rooms, others could free up that space for production if their compressors were built to handle tougher conditions. So, the challenge becomes clear: how can compressors deliver reliable performance when clean rooms aren’t always available, or even needed?
How the right on-site air compressors improve operational uptime in the steel industry
December 2, 2025
Metal manufacturing is not for the faint of heart. Inside the plant, extreme heat radiates from furnaces, heavy machinery pounds with relentless force, and fine metal dust hangs in the air. It’s an environment that pushes every piece of equipment to its limits and when equipment fails, production doesn’t just slow down, it stops entirely. Among the most critical systems in this environment is compressed air. From forging and cutting to finishing and automation, countless processes depend on a steady, clean air supply. A single interruption can halt entire production lines, leading to costly delays and missed deadlines. That’s why investing in dependable, on-site air compressors isn’t just about keeping operations running. It’s a strategic advantage that safeguards productivity and profitability.
Stationary or on-site air compressor: which one is right within the cement industry?
December 2, 2025
Walk into any cement plant and you’ll feel the heat, see the dust, and hear the hum of machinery working around the clock. What you won’t see, however, is one of the most vital components of the entire operation: compressed air. It powers everything from pneumatic conveying systems to bag filter cleaning and even assists in cooling clinker. Without it, production would grind to a halt. But in such a harsh environment, not every compressor can survive. That’s where tough compressors come in: a solution designed to thrive where standard units fail.
Keeping auto parts manufacturing running with Atlas Copco’s E-Air compressor
December 2, 2025
In the fast-paced world of automotive manufacturing, downtime is not an option. When a leading auto parts manufacturer in Greenville, South Carolina faced unexpected breakdowns on their stationary compressors, they needed a reliable solution to keep production running. Atlas Copco’s V1100 portable air compressor stepped in to deliver the power and performance required to maintain operations without disruption.
Reliable air solutions for metal manufacturing
December 1, 2025
In metal production, compressed air is not just a utility. It’s the backbone of your operations. From driving precision tools and supporting automated systems to cooling components and keeping surfaces clean, every process relies on a steady, efficient air supply. That’s why Atlas Copco designs air solutions built for the heat, vibration, and heavy-duty demands of metalworking environments. Our electric, energy-saving compressors deliver consistent performance, reduce downtime, and help you maintain productivity while keeping costs under control - even in the toughest conditions.
Tool up with Atlas Copco portable air compressors
November 13, 2025
For a limited time, when you purchase a small or medium Atlas Copco mobile air compressor, you’ll receive a free handheld pneumatic tool — designed for professional use. No added cost. No extra steps. Just more value for your worksite.
What quality means for compressed air in harsh conditions
October 30, 2025
Industries like construction, manufacturing, mining, and oil & gas use compressed air systems in tough environments. These settings often push machines to their limits. Freezing temperatures, high humidity, dust in the air, and rough terrain can reveal problems in equipment. These issues can cause performance problems, safety risks, and expensive downtime.
Drilling a water well for golf course irrigation with an Atlas Copco portable air compressor
October 14, 2025
Reliable water access is essential not only for households and industry but also for maintaining green spaces that enhance quality of life for urban residents. Japanese underground construction specialist Sansui Kaihatsu Co., Ltd., based in Miyoshi City, Hiroshima Prefecture and serving customers across Japan, drilled a 250-meter water well in Toyota City, Aichi Prefecture to supply sprinklers for a local golf course — powered by Atlas Copco’s Y35 portable air compressor.
Atlas Copco's Modular Hybrid Power Generators are redefining off-grid power solutions
September 29, 2025
Addressing the growing demand for efficient and environmentally responsible power, Atlas Copco introduces its EPH series of modular hybrid power generators. Designed as a direct and cost-effective alternative to traditional diesel units, these intelligent systems drastically cut fuel consumption and operational costs while providing dependable energy exactly where and when it's needed
10 tips to boost drilling efficiency and cut fuel costs
September 5, 2025
Let’s face it—fuel is one of the biggest costs in drilling operations. And with prices fluctuating, every litre and ounce saved is money in the bank. The good news? You don’t need to overhaul your entire setup to see a difference. Small changes in how you choose, use, and maintain your portable air compressor can lead to big savings.
Powering the Edge: How Hybrid Generators Are Reshaping Off-Grid Energy Access
August 20, 2025
For decades, the hum of diesel generators has been synonymous with off-grid power. From remote construction sites and temporary events to emergency backup systems, these machines have long been the backbone of decentralized energy. However, their limitations—high fuel costs, frequent maintenance, and a significant environmental footprint—are well-documented.
Understanding the Fundamentals Behind Our Light Towers
August 12, 2025
When it comes to lighting up a jobsite, outdoor event, or emergency scene, it is not just about how bright the light appears—it is about how effectively that light works for the space you are trying to cover. To truly understand what makes a light tower effective, you need to know two key terms: lumens and lux. If these terms sound unfamiliar or you have forgotten what they mean, do not worry—we have got you covered.
Speeding up slope reinforcement with Atlas Copco's X28 portable air compressor
August 4, 2025
Slope reinforcement is a critical part of safe urban development—especially in mountainous regions like South Korea’s Gyeonggi Province. At a residential construction site in Gwangju, SamBaek Construction is using Atlas Copco’s X28 Stage V portable air compressor to carry out slope reinforcement and seismic retrofitting with greater speed, reliability, and compliance.
No room for error: Atlas Copco portable air compressor chosen for critical bridge deck renewal
July 8, 2025
In Basking Ridge, New Jersey, USA, Konkus Corporation is breathing new life into aging infrastructure by replacing a deteriorating bridge deck with a robust new concrete surface. Central to their success is the Atlas Copco XAS 188 portable air compressor, which delivers the reliable power needed for precise and efficient demolition.
Built to perform: 6 different tough conditions your portable air compressor has to perform in
July 1, 2025
In the world of portable air compressors and industries like construction, mining, and heavy-duty operations, the working conditions are rarely forgiving. From scorching deserts to salty coastal air, mobile air compressors must perform reliably under these harsh conditions. That’s why a truly tough compressor isn’t just built - it’s engineered, tested, and proven to thrive in the toughest conditions.
Atlas Copco introduces its largest container energy storage system with increased capacity to meet needs of demanding applications and loads
June 11, 2025
Atlas Copco has launched its largest container energy storage system (ESS) available on the market – the ZBC 1000-1200 – which delivers 1MW of power output and 1.2MWh energy capacity from a single unit. The new ZBC 1 MW is built using the same advanced and trusted battery technology as Atlas Copco’s existing range of ESS, to deliver a reliable source of power to keep critical jobs in operation and enable users to reduce emissions by up to 90 percent while saving on costs. It is ideal for demanding applications including construction, mining, events, ports, and emergency power.
Reliable water well drilling in rural Spain with an Atlas Copco portable air compressor
June 3, 2025
Reliable access to water is essential for agriculture, construction, and development — and it often starts with efficient water well drilling. In the Spanish countryside near Zaragoza, a local drilling company is relying on Atlas Copco’s compact, powerful, and fuel-efficient X-Air+ 750-25 portable air compressor to carry out deep well drilling projects with ease and confidence.
Atlas Copco’s battery driven B-Air compressor helps Dutch fiber optic blowing companies gain public contracts advantage
May 26, 2025
Dutch companies APK Group CIAG and Ravesteijn Infra & Telecom are leveraging three of Atlas Copco’s battery-powered portable air compressors, the B-Air, to support the installation and maintenance of telecom and data communication networks. By using these low-emission, low-noise portable air compressors for blowing fiber optic cables and conduits, they gain a competitive edge in public contracts by delivering high-performance results while reducing local emissions and noise pollution.
Atlas Copco enhances its total portable air solutions with a new range of portable desiccant dryers
May 19, 2025
This latest innovation enhances Atlas Copco’s commitment to offering a complete, integrated portable air solution, combining high-efficiency air dryers with the company’s portfolio of portable compressors, nitrogen generators and high-pressure boosters.
Atlas Copco's portable air compressors extend the life of South African agricultural equipment
May 15, 2025
Smart farming is underpinned by minimised input costs and maximised yields, which can be achieved through adopting simple practices, such as regular cleaning of agricultural equipment. In South Africa, crop farmers are effectively using Atlas Copco’s rugged, compact and versatile U190 PACE compressors for the maintenance of their agricultural equipment.
Built for the pressure: Atlas Copco's DrillAir portable air compressors and high-pressure boosters support pipeline integrity in Romania
April 14, 2025
To test the limits of a pipeline, you need to trust the machines behind the pressure. On the shores of the Black Sea, Atlas Copco’s portable air solutions prove their strength in one of Romania’s most important infrastructure projects. Atlas Copco’s DrillAir portable air compressors and boosters are designed for demanding environments. With working pressures up to 90 bar, they’re ideal for rigorous pipeline testing and inspection.
Reviving history: Atlas Copco’s portable air compressor powers restoration of Prague’s Šítkov Weir
March 19, 2025
For centuries, the Šítkov Weir, an historic dam altering the flow of the Vltava river, has stood as a silent witness to Prague’s rich evolving history. Now, this 16th-century landmark is undergoing a transformative restoration powered by Atlas Copco’s XAS 88-7 portable air compressor, seamlessly merging heritage preservation with modern engineering.
A leap forward in efficient and reliable lighting solutions with the second generation of Atlas Copco solar light towers
March 6, 2025
Atlas Copco has launched the second generation of solar light towers, the HiLight MS 4 and MS 5, a groundbreaking development in their commitment to providing the market with efficient, safe, and dependable lighting solutions for operators in a wide range of applications from events to oil and gas, construction, and mining.
Powering Portugal’s marble industry with Atlas Copco’s electric E-Air compressors
February 12, 2025
In Portugal’s Alentejo region, Solubema Quarry faces some harsh operational challenges. Extreme temperatures and pervasive dust are met with Atlas Copco’s E-Air H250 VSD portable air compressors, prioritising efficiency, reliability and mobility in marble extraction.
Built on history, driven by innovation: Atlas Copco’s mobile air compressors
January 30, 2025
Discover 120 years of Atlas Copco innovation in portable air compressors. From its first internal combustion engine portable air compressor to today’s electric and battery-driven mobile air compressors, explore how we lead the way in performance, reliability, and efficiency.
5 innovations shaping Atlas Copco’s legacy in portable air compressors
January 30, 2025
Explore five groundbreaking innovations by Atlas Copco that transformed the mobile air compressor industry. From pneumatic tools and portable diesel compressors over a century ago to electric and battery-driven mobile air compressors today, discover the milestones driving performance, efficiency, and reliability.
18-Year Journey of Success: A Story of Efficiency and Trust in Production
January 16, 2025
Discover D.G. Khan Cement Company's 18-year journey of efficiency and trust powered by Atlas Copco's XAHS 426 Cd portable compressor. Explore how this durable solution revolutionized operations in demanding quarry environments, ensuring reliability, performance, and customer satisfaction.
Power meets precision: Atlas Copco drives water well drilling in Turkey
December 6, 2024
Uzman Sondaj, an underground and underwater exploration specialist in Karaman, Turkey, leverages Atlas Copco’s Stage V portable air compressors to achieve high performance, fuel efficiency, and reliability – even in the most demanding drilling environments.
Geothermal drilling solutions for the clean energy mix
December 5, 2024
Atlas Copco’s DrillAir range offers mobile, compact, and efficient solutions for geothermal drilling. Reduce fuel consumption and support the clean energy transition with the innovative X-Air+ 750-25 and X-Air+ 1200-40, designed for deep and shallow drilling applications.
The power behind geothermal drilling
December 4, 2024
Discover how Atlas Copco's advanced compressed air technology geothermal drilling efficiency, sustainability, and cost-effectiveness. From high-pressure performance to field-proven reliability, learn how innovative compressors support cleaner energy.
Atlas Copco X-Air+ 750-25 portable air compressor: Redefining drilling efficiency in the UK and France
December 3, 2024
Imagine a portable air compressor compact enough to fit on a standard trailer yet robust enough to power through the toughest geothermal drilling projects. That’s the X-Air+ 750-25, Atlas Copco’s latest innovation in its DrillAir family. Two recent applications in the UK and France illustrate how this compact powerhouse is redefining drilling standards in vastly different environments.
Atlas Copco Solutions in the Modernization of Petrol Stations in Iraq
November 26, 2024
Atlas Copco successfully completed the modernization of petrol stations in Iraq using high-performance XAS 138 compressors and TEX 190 PE breakers. By providing tailored solutions, Atlas Copco ensured uninterrupted service, enhanced safety, and improved efficiency for the project.
Why Choose Atlas Copco Utility Series for Wireline Applications?
November 25, 2024
Atlas Copco Utility Series compressors stand out in wireline operations with their compact design, energy efficiency, and durability. Reliable and portable air compressor solutions for perforation and other field applications.
From Sandblasting to Standby Air: A Versatile Air Solution
November 6, 2024
Discover how a leading oil refinery in Pakistan enhanced its operations with the Atlas Copco XAHS 400 PACE portable air compressor, enabling in-house sandblasting and standby air supply. This versatile solution has boosted efficiency, reduced costs, and strengthened the refinery’s industry position for future projects
Exceptional Performance with Atlas Copco's XAHS 400 Compressor in the Fiber Project
October 14, 2024
Discover how Atlas Copco's XAHS 400 compressor, featuring PACE technology, enhanced the success of the FTTH project in Erbil. Explore the key advantages that made this high-performance solution essential for overcoming technical hurdles in providing high-speed internet services across Iraq.
The rise of AI in the industrial sector
October 9, 2024
With rapid advancements and investments, artificial intelligence is revolutionizing assembly operations. AI is becoming a powerhouse in these operations, and it is vital for companies to embrace it, rather than fear it, to thrive in the competitive industrial landscape.
Atlas Copco WEDA electric dewatering pumps optimise lithium extraction process at Chilean mine
September 26, 2024
A mine in northern Chile has doubled its lithium extraction rate since installing Atlas Copco’s WEDA drainage pumps. Operators at the South American mine wanted to improve their lithium extraction process and turned to Atlas Copco’s distribution partner, TRILE, for expert advice and a reliable solution. In addition to optimising its process, the mine has also reduced its maintenance costs by 60%.
Atlas Copco Solutions Maximizing Performance at a Key Refinery in Pakistan
September 9, 2024
Discover how Atlas Copco formed a strong and sustainable partnership with Pakistan’s oldest refinery, providing reliable air compressor solutions that enhanced efficiency, performance, and long-term operational success.
Robust and Reliable Air Compressor Solution for the Jaggran Hydropower Project
September 1, 2024
Discover the reliable air compressor solution that powered the Jaggran Hydropower Project. Designed to perform in extreme high-altitude conditions, the XAHS 710 Cd Portable Air Compressor ensures consistent and powerful air supply for demanding tunneling operations, enabling the successful completion of this ambitious 48 MW clean energy initiative.
Atlas Copco energy storage systems optimize the power supply at Primavera Sound 2024 Barcelona
August 30, 2024
In a disruptive initiative for the event industry, Atlas Copco and Morillo Energy Rent, with vast experience in delivering energy solutions, have successfully implemented an innovative energy solution based on energy storage systems at the Primavera Sound 2024 (Barcelona) music festival.
Superior Solution for Basra's Oil and Gas Fields
August 8, 2024
Atlas Copco Power Technique Iraq improved gas management and reduced environmental impact at Basra's major oil and gas field by delivering 12 portable air compressors. These compressors enhanced operational efficiency and supported environmental sustainability. Key benefits include standardized operations, ease of maintenance, and extensive aftermarket support. This project showcases Atlas Copco's commitment to providing high-quality, eco-friendly solutions and achieving customer satisfaction.
Atlas Copco extends its WEDA submersible pump range to meet the demands of 21st century dewatering tasks in mining and construction.
July 18, 2024
Atlas Copco Power and Flow has launched four new models of WEDA electric submersible pumps in response to increased requirements on dewatering pump wear resistance and autonomous operation.
Critical dewatering operations ensure on-time delivery of bridge construction project in the Philippines
July 5, 2024
Atlas Copco’s footprint and expertise have improved critical dewatering operations on a strategic infrastructure project in The Philippines. The Dipolog-Dapitan bridge project is one of several development initiatives on the island of Mindanao, intended to boost economic growth in the region. Despite high levels of rainfall, safe working conditions have been maintained and the project has been kept on schedule through the deployment of Atlas Copco dewatering pumps.
A Journey of Transformation Atlas Copco's Impact in Baluchistan's Cement Sector
May 30, 2024
This transformational story in Baluchistan's cement sector reflects the power of Atlas Copco's innovative solutions and customer-centric approach. It goes beyond just a collaboration; it's a story of transformation and success.
Overcoming extreme challenges in Chile's vertical mines with Atlas Copco portable air compressors
May 29, 2024
At over 4,000 meters above sea level, Atlas Copco’s portable air compressors are lifting vertical mining operations to new heights; providing the essential toughness, precision and power required for such a high-intensity application.
The role of lithium-ion batteries in the evolution of the mining industry
March 25, 2024
Industries worldwide are making a great effort to limit their carbon footprint and reduce their greenhouse gas emissions, and a key factor in this transition is the adoption of renewable energy sources. In today's technologically advanced mining industry, where portable air and power are increasingly crucial, batteries play a key role in enhancing productivity and operational efficiency.
Atlas Copco enhances its customer solutions with a new range of portable nitrogen membrane generators
March 19, 2024
The new portable nitrogen series redefines nitrogen generation, delivering tailored nitrogen solutions for all tough environments. It promises unparalleled purity, efficiency, and resilience, strengthening Atlas Copco’s position as a full-service provider.
Energy storage systems transform power supply for the construction of the future E18 Western Corridor in Norway
March 6, 2024
Skanska is working on the construction of the future E18 highway outside Oslo, Norway. To complete the Strand-Ramstadsletta stretch and to cover the high energy demand required on-site while meeting environmental goals, Skanska relies on a battery-based energy storage system from Atlas Copco for optimized power distribution and consumption.
Atlas Copco provides critical power supply for the installation of the world's first 16MW wind turbine
February 9, 2024
Atlas Copco has supplied a QES 60 power generator for the successful installation of the world’s first 16-megawatt offshore wind turbine, in southeast China's Fujian Province. Atlas Copco's partner in the region, Chengdu Shiwei Technology Corporation, delivered this reliable QES power generator to provide the critical power supply needed for the spreader to install the three large turbine blades.
10 Total Cost of Ownership myths: Debunked
January 31, 2024
Think beyond the sticker shock! Discovering the true value in a higher purchase price for your mobile air compressor requires a shift in perspective. It's not just about the upfront cost, but rather when Total Cost of Ownership (TCO) proves to be more economical than cheaper alternatives. Here, we flip the script and debunk the most common misconceptions related to TCO, helping you make more savvy purchase decisions.
Atlas Copco’s ZBC energy storage systems enable music festivals in Spain to significantly reduce their carbon footprint
January 18, 2024
Four Atlas Copco ZBC 250-575 energy storage systems have been touring Spain this summer, enabling Europe's leading music festivals to reduce their carbon footprint. Contractors have been searching for an alternative solution to meet their power needs while also cutting costs and meeting emission regulations.
Atlas Copco’s Energy Storage System wins Environmental Product of the Year Award
December 15, 2023
Atlas Copco’s ZBC energy storage systems have won the prestigious ‘Environmental Product of The Year’ award in the Association of Manufacturers and suppliers of Power generating Systems (AMPS) Excellence awards.
Atlas Copco ZBP energy storage system optimizes electric crane use in hospital construction site
November 29, 2023
Atlas Copco has supplied a reliable ZBP energy storage system (ESS) to efficiently power cranes at a construction site of a hospital in Alentejo, in southern-central Portugal. ACCIONA, the Spanish multinational company managing the project, has used the battery-based storage system to set up a hybrid solution with a power generator to optimize the environmental footprint of the crane’s electric motor, achieving significant fuel, energy and lifecycle savings.
Atlas Copco to power the world’s first national fully electric touring car championship
October 26, 2023
The Scandinavian Touring Car Championship (STCC) will become the first national racing series in the world to compete with electric touring cars. Key to enabling this transformation are Atlas Copco ZBC battery-based energy storage systems, which will be used to recharge the electric cars.
Swedish consortium joins initiative to electrify the US construction industry
October 5, 2023
Atlas Copco Group, Husqvarna Construction, and Volvo Construction Equipment will team up with the Sweden-US Green Transition Initiative to showcase fully electrified construction of green infrastructure in the US.
Atlas Copco ZBC energy storage systems optimize the use of renewable energies at Antwerp Euroterminal
September 13, 2023
Antwerp Euroterminal, which is based at Belgium’s Port of Antwerp-Bruges (the world’s largest roll-on, roll-off port), is undergoing a vast energy transformation. To operate more sustainably, the terminal is reviewing its power supply infrastructure and energy use.
Enhance your portable air compressor experience: top 7 mistakes to avoid
September 8, 2023
You can’t always control the external conditions your portable air compressor will be faced with – but you can make sure it is tough enough for any challenge. Here are seven common tough conditions your air compressor might have to deal with. But fear not, solutions are available.
Atlas Copco hydraulic breaker cracks down on tough underwater project
August 23, 2023
In Malta’s biggest harbor, a big electrification project is ongoing to energize cruise liners and cargo ships with clean electric energy instead of diesel fuel. For the intensive underwater works, contractor Pina Dalgıçlık İnşaat San and Trade is using an Atlas Copco handheld breaker and power pack. An ideal fit for the ultra-tough and unusual cable laying project.
Atlas Copco ZBC energy storage system to run emission-free construction site in Norway
July 17, 2023
In Norway, innovative solutions are being sought after to enable emission-free operations and, in that context, an Atlas Copco’s ZBC 250-575 energy storage system has been delivering the necessary energy to reline 2,400 meters of pipeline at a residential neighborhood in Kruttverkveien, in the greater Oslo area.
The journey of the electric submersible dewatering pump in mining applications
May 29, 2023
Electric submersible pumps have a solid history in mining applications. In this article, Bart Duijvelaar, Product Marketing Manager of Submersible Pumps at Atlas Copco Power and Flow, explains how the mining industry should rely on manufacturers that can provide the right solutions to meet the mining challenges.
Atlas Copco WEDA submersible pumps ensure the viability of operations in an open pit gold mine in the Philippines
April 10, 2023
Power Systems Incorporated (PSI) Deutz Division, Atlas Copco’s exclusive distributor for WEDA electric submersible pumps in the Philippines, has delivered two units of the recently launched WEDA D95 and six of WEDA D50N to a big player in the national mining industry. These robust and reliable pumps are working at an open pit gold mine in Surigao del Norte, in the island province of Caraga, Philippines, enabling the diversion of ground and runoff water.
Sustainable quarries are the future
March 30, 2023
Emission norms are changing operations in the entire construction industry, including quarries. In the journey towards stronger compliance with emission standards, the focus is now way beyond only health and safety regulations for operators. While productivity and efficiency remain the key priorities, the need for a balance with more sustainable solutions is now becoming more of a need than an option.
Atlas Copco and Airlif Compressors deliver toughest mobile compressed air solution for opencast mines in South Africa
March 28, 2023
Atlas Copco Power Technique and Airlif Compressors & Pumps have collaborated to supply ultra-tough and reliable U110PACE air compressor units for demanding opencast mine projects across Mpumalanga, South Africa.
Five aspects to consider when selecting dewatering pumps for quarrying
March 2, 2023
One of the most crucial components of any quarrying application is managing water. Whether the water accumulates in the quarry from heavy rainfall, groundwater seepage, or both, it must be removed for the quarry site to continue operations. To keep everyone’s feet and equipment dry, dewatering pumps are used in quarries all around the world.
Atlas Copco inaugurates dedicated production line for electric portable air compressor in Belgium
February 13, 2023
The first of its kind in the company’s facilities in Antwerp, the new all-electric production line has cut lead times for deliveries of plug-in portable compressors by 50%, accelerating the wider sustainable transformation.
Atlas Copco's electric E-Air compressor plays vital role in cost reduction during shotblasting operations in UK
January 25, 2023
For more than 30 years, RJ Webb Commercials has specialized in the complete repair and restoration of vehicles. To prepare any vehicle properly for restoring to its former glory, the Welsh company is conducting shotblasting work to clean, descale and properly prepare the surface for the restoration, ensuring the best possible finish.
Atlas Copco WEDA submersible pumps enable critical operations in underground Swedish mine
January 19, 2023
To ensure efficient and safe extraction of the ore, Atlas Copco WEDA submersible pumps deliver under extreme conditions to avoid flooding in Zinkgruvan, one of the oldest undeground mines in Sweden.
Sustainable relocation of a Swedish industrial port, using the electric E-Air compressor
December 6, 2022
The city of Varberg, Sweden, is changing and the industrial port is being moved. The contractor Svenska dmixab is stabilizing the ground in a sustainable way with the help of the electric driven compressor E-Air H250 VSD, as well as a slag product from cement production.
Challenges of water removal on construction sites
November 7, 2022
One of the most common temporary pump applications is water removal on construction sites. There are many ways to set up the equipment in a pump application, all of them have two vital elements in common. Dewatering pumps downtime can cause severe safety problems and impact the productivity of all contractors on site.
The path to sustainable pumping
October 18, 2022
One vital piece of equipment that can go a long way towards positively contributing to improved sustainability is dewatering pumps. Various factors should be considered, such as reducing downtime, improving serviceability, reducing emissions, legislation, and ensuring the pump is properly sized to operate most efficiently.
Atlas Copco’s Solar Light Towers and Energy Storage Systems power the way at Santiago’s new convention center
September 16, 2022
Santiago de Chile, witnessed one of the most anticipated events in the region with the opening of the Metropolitan Santiago. Atlas Copco is honored to be associated with this event center, which is a strong stamp of commitment to the environment and sustainability focus in the Chilean community.
Electric compressor’s environmental and economic benefits join forces for drilling company in Norway
August 23, 2022
With the arrival of an E-Air V1100 from Atlas Copco, Brødrene Myhre, one of Norway’s largest drilling companies, is shifting to cost efficient, silent and low-emission electric machines.
Global heat wave ‘a wake-up call for construction’
August 9, 2022
This summer’s record temperatures, droughts and wildfires are underlining the reality of climate change. Construction equipment must switch to electric if we are to play our part in stopping the planet overheating, says Maarten Vermeiren, Product Marketing Manager Sustainability and Digitalization at Atlas Copco Portable Air.
Zero emission electric portable air compressors are a breath of fresh air for Chinese underground mine application
August 4, 2022
Kunming Fengjing Mining is a mining company based in the Yunnan province in the west of China. The company has been operating in copper mining for over 15 years at Dongchuan Copper Mine Field.
Solar energy storage – getting the most out of the sun
August 1, 2022
A key factor in this transition to low-carbon energy is the adoption of renewable energy sources, and solar energy deserves particular attention. The problem, however, is now to harness that energy and use it effectively. To make sure the maximum amount of energy is captured and used, the only viable option is solar energy storage.
Morillo Energy Rent relies on Atlas Copco Energy Storage Systems to meet its sustainability goals
June 17, 2022
With over 60 years of experience delivering energy solutions, Morillo Energy Rent aims to be an active player in the crusade against climate change and the energy transition within the temporary power rental sector. To achieve these goals, the Spanish company has recently purchased several ZenergiZe ZBP 45 Energy Storage Systems from Atlas Copco.
Clean energy compressors and dam project go hand-in-hand in Pakistan
June 15, 2022
Once completed, the Suki Kinari Hydropower project will deliver a much-needed 3 gigawatts of renewable power to Pakistan’s electrical capacity. And it’s not just the dam that will generate clean energy, contractor CGGC is relying on a fleet of 45 electric Atlas Copco compressors on the 20km of tunnels the project requires.
Electric portable air compressors drive renewable revamp of biomass plant
June 7, 2022
In the south-west of Germany, a biomass power plant underwent a planned biannual maintenance shutdown. IB Service, industrial maintenance specialist, used zero carbon electric portable air compressors from Atlas Copco to sustainably drive the plant’s transformation.
Experiencing Atlas Copco Energy Storage Systems with wind energy
May 27, 2022
Mark Adams, Sales & Marketing Director at Air Plus, shares his experience with Atlas Copco's range of Energy Storage Systems working in several applications: storing and delivering wind energy, and working in hybrid mode with power generators in construction applications.
Emission-free compressor assists rock stabilization works in Bastei’s national park, Germany
May 17, 2022
Imagine a fairytale bridge, nested in a spectacular rock formation of a nature reserve in Saxony, Germany. This is the site where Jähnig GmbH Felssicherung handles an extensive rock stabilization project that will ensure visitors’ safety. The company relies on an Atlas Copco electric mobile compressor, which is completely emission-free, quiet, and exactly the right fit for their pneumatic equipment.
Atlas Copco Portable Air launches E-Air campaign ‘Your Silent Partner’
May 5, 2022
Focusing on how the company is investing in the sustainability of its products for the benefit of customers, the communication campaign promotes the electric E-Air compressor as a ‘silent partner for the toughest conditions’.
Increase productivity in construction
April 18, 2022
Reliable power is a key factor that affects construction site operational efficiency and, therefore, productivity. Until now, the industry has relied heavily on diesel generators in the past, but Energy Storage Systems (ESS) offer some advantages that play a part in improving construction industry productivity.
Atlas Copco takes sustainability, productivity, and efficiency to new levels with its hybrid power solutions
April 12, 2022
The new range of Energy Storage Systems from Atlas Copco maximizes sustainability for operators by working in hybrid mode with efficient diesel-driven generators. This solution helps them cover power peaks and low loads – extending their lifespan and providing a rapid return on investment (ROI).
WEDA submersible pumps' hydraulic design for sustained perfomance
March 10, 2022
Last year, Atlas Copco Power and Flow launched the WEDA D70, an electric submersible pump with a disruptive hydraulic design that will be progressively implemented in subsequent models. What are the main benefits brought by the innovative high-tech platform?
Atlas Copco digitalizes its customer interaction
December 14, 2021
Atlas Copco’s Power Technique business area adapts its marketing activities to an increasingly digital world. As a leading industrial brand, it has always focused on a customer-centered approach in its marketing activities. Our interaction has evolved drastically in the past two years; the business area embraces a more digital customer journey.
Atlas Copco drill rods ensure better drilling speed and penetration during in-line drilling operations for Matha Overseas
December 9, 2021
Amogh N, mechanical engineer for Matha Overseas, explains how the low maintenance rods are used for drilling holes in the Ilkal pink granite, which is one of the hardest granites in India.
Atlas Copco helps Dayim to increase sustainability with the sale of 75 HiLight S2+ solar light towers
November 30, 2021
Atlas Copco Power and Flow division has sold 75 units of its latest user-friendly solar-powered LED light tower, the HiLight S2+, to Dayim Equipment Rental Co in Saudi Arabia and Qatar.
Portable Air division provides more than 600 portable compressors to Boels Rental
November 17, 2021
Boels Rental, one of the most renowned equipment rental companies in Europe, has placed an order at the Portable Air division for more than 600 portable air compressors, both Stage V diesel units, and E-Air VSD electric mobile compressors.
Atlas Copco light towers efficiently illuminate Extreme Sports Barcelona
November 9, 2021
Four HiLight B5+ light towers illuminated the main sporting stages at the eleventh edition of Extreme Sports Barcelona, celebrated at Forum’s Park. The event’s eleventh edition gathered the best scooter, skate, BMX, and breaking athletes internationally.
How does a solar powered light tower work?
September 23, 2021
Solar powered light towers are becoming a strong alternative to diesel-driven light towers. The new generation of solar light towers enable users to reduce CO2 emissions while enjoying the functionalities of a traditional model. This allows end-users to take on greener operations and comply with the CO2 emissions and noise regulations.
Atlas Copco's Energy Storage Systems receive Matexpo Innovation Award
September 20, 2021
Atlas Copco Power Technique Belgium has showcased its Energy Storage Systems at stand B52 of the Matexpo exhibition in Kortrijk (Belgium). The ground-breaking energy storage system from Atlas Copco has won the third prize of the Matexpo Innovation Award.
Working underground with an E-Air and an Energy Storage System
September 19, 2021
At the heart of Brussels, Belgium, construction company Jan De Nul is building a new subway line and station. A complex project, with underground construction in the middle of a vibrant city. Sustainability is high on Jan De Nul’s agenda so when Atlas Copco gave them the chance to try out an electric mobile compressor with Atlas Copco Energy Storage System, they immediately saw the possibilities.
Atlas Copco Power and Flow lights the Zojila tunnel project in India
July 21, 2021
Atlas Copco’s HiLight V5+ light towers provide power for the Zojila tunnel project in the Kashmir valley, India. This 14.2 km long road tunnel will be one of the largest in Asia, and will connect Srinagar valley and Leh.
Electrifying rental fleet for cleaner compressed air and lower running costs
June 21, 2021
When Atlas Copco launched their first electric mobile compressor, Arentis, an industrial equipment rental company in the Netherlands, didn’t hesitate to take the compressor into their fleet. Arentis and its customer explain how electrifying their compressor fleet contributes to cleaner and more cost-efficient operation.
Brazilian granite quarry relies on Atlas Copco compressors’ rock-solid reliability
June 18, 2021
Brazil: that is coffee and carnival. But also natural stone of the highest quality. DAPAZ natural stones is a family-owned company that has been quarrying high-quality granite for over 50 years. Atlas Copco’s compressors are the rock-solid solution DAPAZ needs or its daily operations.
Atlas Copco provides reliable power to a German Covid vaccination centre
June 11, 2021
Two Atlas Copco's QAS 5 Stage V generators and a ZenergiZe energy storage system have been powering a Covid vaccination center in Germany, Impfezentrum Münster. These solution ensured that vaccinations were carried out on time.
New Energy Storage Systems optimize high-power applications with up to 2MW of energy
April 27, 2021
Atlas Copco has introduced ZBC, the latest model in its lithium-ion energy storage system range, called ZenergiZe. It can be used as a standalone source, combined with generators to make a hybrid power solution or renewable sources of energy as well as to create Microgrids. The new ZenergiZe is the ideal solution for demanding applications that require a constant and significant flow of electrical energy.
Atlas Copco TwinPower powers the production of Jasmine Water and Beverages Factory Ltd. Co in Saudi Arabia
March 15, 2021
When Jasmine Water and Beverages Factory Ltd Co, a large water and beverage factory based 120km west from Riyadh city, needed a reliable and uninterrupted power supply for its 24/7 operations, they turned to Atlas Copco’s partner GCC Olayan for a solution.
Atlas Copco expands Versatility range of mobile compressors with four new models
February 3, 2021
Atlas Copco has extended its Versatility range of mobile compressors with the launch of XAS 188-10 PACE, XAS 188-14 PACE, XAS 288-10 PACE, and XAS 238-14 PACE. With this addition, Atlas Copco’s Versatile range offers operators optimal fuel efficiency and increased productivity. The new models are Stage V compliant and built for harsh environments, such as construction, quarrying, mining, and demolition sites, thanks to Atlas Copco’s Hardhat® canopy.
Atlas Copco’s QAS 5 helps Krill Generadores safeguard the Spanish communication system and the power grid
January 28, 2021
The arrival of storm Filomena threatened the Spanish communication system and the power grid. Krill Generadores, a specialist in emergency assistance, provided four portable QAS 5 generators from Atlas Copco to overcome these challenging times.
Air Plus, Atlas Copco’s distributor in Belgium, sharing its experience with the QAC TwinPower range
January 26, 2021
Mark Adams, Sales & Marketing Director at Air Plus, shares his experience with the latest TwinPower Stage V solution. At Air Plus headquarters in Zemst, Belgium, Adams explains why their customers have decided to work with Atlas Copco’s QAC TwinPower generators before relying on other options.
Atlas Copco’s generator distributor in Belgium, on the QAC TwinPower
January 5, 2021
Filip Maes, Fimatec CEO & Owner, shares his experience with the unique TwinPower Stage V solution. At Fimatec premises in Waregem, Belgium, Anja Wiehoff, West Europe Communications Manager at Atlas Copco, and Maes discuss the virtues of the QAC TwinPower generator range.
Stage V compliant small diesel compressor range released
November 18, 2020
In response to the upcoming regulation, Atlas Copco has upgraded its popular 8 Series of air compressors to meet the most stringent emission norms for construction and road equipment, making it the cleanest range on the market. In addition to greener operation, the compressors now feature innovative new technologies that help cut operating costs and improve productivity, with 25 percent less fuel consumption.
Efficient high pressure compressors: the Drillair range
November 16, 2020
The DrillAir range provides one of the highest air volumes at one of the highest air pressures available in the portable compressor industry. This also makes these new compressors one of the most energy efficient by having a very low specific fuel consumption for the air delivered.
7 questions rental companies should ask before buying a new mobile compressor
November 16, 2020
Do you run your own equipment rental company and have to decide on which compressor to take in your fleet? Or perhaps you’re often relying on rental equipment to run your own business and you want to know what to look out for. These are 7 questions will help you to choose the next compressor for your rental fleet.
Renewing a biomass plant using renewable power
November 16, 2020
In the south-west of Germany, a biomass power plant underwent a planned biannual maintenance shutdown. IB Service, an industrial maintenance specialist, used zero carbon E-Airs from Atlas Copco to sustainably drive the plant’s transformation.
The XAS 188 portable air compressor offers an ideal solution for the construction industry
November 12, 2020
Atlas Copco has developed a new portable compressor solution for the US and Canadian markets. It is ideally suited for the construction industry and features best in class efficiency, easy servicing and an integrated controller. The XAS 188 was designed with input from local customers and is manufactured in the US, making it a perfect match for local conditions.
LED vs Metal halide light towers: five key considerations
October 30, 2020
The benefits of a longer lifespan and the ability to generate greater and wider illumination while consuming less power are among the main benefits of switching to LED. It may sound like a simple decision, but once a buyer has decided to look at LED, there are a number of factors to bear in mind before buying.
Rising to new heights in the Flow
October 27, 2020
The new PAC H range pumps for high-pressure applications has been designed to reduce downtime and prolong lifespan, saving operational costs. These centrifugal pumps can reach up to 150 metres in head, with a capacity of up to 1.200m³/h and can handle solids of up to 89mm.
HiLight H6+, a light tower to rise illumination while reducing noise and operational costs
September 22, 2020
The new light tower from Atlas Copco offers low operational costs and reduced noise levels while increasing illumination coverage. The HiLight H6+ is ideal to use in tough environments, such as applications in construction, mining, events, and rental, thanks to Atlas Copco’s innovative HardHat® body.
HiLight H6+ more than meets the eye
September 22, 2020
Learn all about the latest addition to the HiLight towers family, the new HiLight H6+. This new light tower offers low operational costs and reduced noise levels while increasing illumination coverage. Resistant to corrosion, it features a new generation of LED floodlights that can cover up to 6.000 m².
Atlas Copco helps Raylex create a hybrid generation system to power an autonomous communication system
September 17, 2020
When Raylex, a specialist in highly complex turnkey projects in the electricity, telecommunications, governmental, and mining sectors, needed to create an autonomous radio communications system as part of its hydroelectric project, it turned to Atlas Copco Power and Flow for a solution.
Zero is the new number One
September 12, 2020
Discover the new ZenergiZe, your clean and quiet source of energy. This battery-driven energy storage system helps operators to reduce fuel consumption and CO2 emissions, while delivering optimal performance with zero noise and virtually no maintenance. Watch the event and discover all its applications!
Atlas Copco’s new ZenergiZe energy storage systems deliver clean and quiet power in a compact package
September 8, 2020
Atlas Copco has launched ZenergiZe, a new range of lithium-ion energy storage systems that can be used as a standalone solution or combined with generators to create a hybrid power solution. ZenergiZe delivers zero CO2 emissions, zero noise, and have virtually zero maintenance needs, enabling operators to minimize environmental impact while benefiting from a low cost of ownership.
Rental company upgrades fleet with XAS 88 compressor
May 28, 2020
Exclusivas Rodriguez Espinosa SL, a rental company in Spain, selected Atlas Copco’s 8 series compressor range for it’s reliability, serviceability, and unique features like the HardHat canopy. A compressor, packed with extra’s; all under 750 kg.
HiLight H5+ light towers illuminate the way for the construction of the Greece-Bulgaria gas pipeline
May 25, 2020
Construction Group AVAX SA has selected HiLight H5+ light towers from Atlas Copco for use on the prestigious gas interconnector Greece-Bulgaria (ICGB) construction project. These low-fuel consumption light towers are providing excellent luminosity, which is essential to ensuring workers have good visibility and can continue their operations efficiently both day and night.
Atlas Copco QAS generators boost snowmaking capacity of Chile ski resort
May 25, 2020
To combat unseasonably low snow cover and to maintain optimal slope conditions, Ski Portillo in Chile now has five times more snowmaking capacity thanks to the installation of four Atlas Copco QAS generators powering 25 snow cannons.
Full commitment in emergency times
March 10, 2020
The scenario left by the flooding and mudslides was devastating caused by ‘Fenonemo del Niño’ in the Peruvian coast. The emergency asked for a quick response and Atlas Copco replied with technology, technical knowledge and enthusiastic solidarity from their workers.
The Atlas Copco E-Air H250 VSD electric mobile compressor was awarded “Best product” by the Australian Hire and Rental Association in their annual Hire Industry Excellence awards (HRIA Awards).
July 23, 2019
It was Atlas Copco’s dealer, Redstar, who enrolled with Atlas Copco’s newest electric mobile compressor, which features a very energy-efficient permanent magnet motor and ruggedized design. With the award, the world of rental companies embraces an electric mobile compressor as innovative solution for the industry.
Atlas Copco’s intuitive, easy-to-use Smart Air Xc4004 controller puts users in complete control
May 24, 2019
Atlas Copco is set to launch the new Smart Air Xc4004 controller on all its large and specialty air compressors with flows from 20 to 128 m3/min (700 to 4500 cfm) and pressures up to 345 bar (5000 psi).
Atlas Copco to showcase latest innovations in clean drive technology at BAUMA 2019
March 27, 2019
At BAUMA 2019 Atlas Copco is set to unveil new sustainable portable air, power and flow equipment that reduces operational expenditure through enhanced clean drive technology, connectivity and versatility.
Atlas Copco completes its portfolio of WEDA submersible dewatering pumps
January 29, 2019
Atlas Copco Power and Flow has completed its portfolio of WEDA electric submersible dewatering pumps. They have achieved this comprehensive coverage by completing the ranges for drainage and sludge applications and adding a completely new range for slurry applications. Selection from the entire, expanded range is simplified as all models are classified by application and type of fluid that they handle.
Atlas Copco lights up Diwali celebrations
May 8, 2018
Every autumn thousands of people visit the BAPS Shri Swaminarayan Mandir (Neasden temple) in London to celebrate Diwali, the Hindu ‘Festival of Light’. This year the festival organisers chose Atlas Copco’s LED HiLight towers to light up the walkways, pavements and areas around the temple.
Atlas Copco Power Technique unveils vision for Powering the Future of global industry
April 16, 2018
The leadership team of the Atlas Copco Power Technique business area has presented a strategic vision outlining how mega-trends such as digitalisation and the construction of smart cities will be powered by cleaner and more connected energy source technologies.
Atlas Copco combines PACE technology with HardHat® on updated XATS 138 portable compressor
November 28, 2017
Atlas Copco has combined its PACE technology with the legendary HardHat polyethylene canopy on the updated XATS 138 single-axle portable compressor. The new design offers construction contractors and rental fleet operators a compelling mix of toughness of versatility.
Dispelling Myths: With music
January 23, 2020
Any type of diesel power generator can be paralleled together with another type as long as their frequencies and voltage are the same at the point of interconnection. Connecting generators in parallel increases the power capacity, control in load management, ease of maintenance and redundancy. By adding generators modularly, sites can install what they need when they need it.
Dispelling Myths: Light toughness
January 23, 2020
Our light towers have an aluminum casting which provides heavy duty protection, even during transportation. The new light towers come with the legendary Atlas Copco HardHat canopy as standard. Offering unrivalled tough but lightweight protection in order to maintain the value of the asset even after many years on the road.
Dispelling Myths
April 30, 2021
There is nothing more powerful than storytelling, even more if it comes in an entertaining way that brings tough science and technology facts into an understandable reality. The experts in pumps, generators and light towers provide a new view about these products with the Dispelling myths.
7 questions rental companies should ask before buying a new mobile compressor
January 21, 2020
Do you run your own equipment rental company and have to decide on which compressor to take in your fleet? Or perhaps you’re often relying on rental equipment to run your own business and you want to know what to look out for. In both cases, you may not be aware that not all mobile compressors are equally well suited for renting out. Your profitability can also benefit from choosing the right compressor: go for the model that allows you to get most utilization at the best rental rate. These are 7 questions you need to ask before choosing the next compressor for your rental fleet.
Energy Storage Systems
April 20, 2022
Sustainability is increasingly becoming a major concern in many machine-driven industries, as regulations regarding noise and emissions are growing stricter. There is a need for a technological solution that provides reliable power in silent operation, while reducing fuel consumption and CO2 emissions.
Be Bright. Choose a Solar Light Tower
January 18, 2022
The HiLight S2+ light tower is a user-friendly solar-powered LED light tower, which enables users to reduce CO2 emissions by up to six tonnes compared with traditional technologies. The innovative S2+ light tower delivers efficient, high performance, giving workers good visibility while allowing sites to increase their sustainability and comply with zero CO2 emission and noise regulations.
Renewable energy storage systems to power the future
August 19, 2024
The most efficient way to store – and deliver – energy coming from renewable sources is through battery-based renewable energy storage systems. The more battery storage for renewable energy that is available the less there will be a need for the conventional power sources of the past.
How does an Energy Storage System work
May 25, 2021
Atlas Copco’s ZenergiZe range is a good example of how the high-density li-ion batteries can be leveraged to enable a new level of sustainability, flexibility, and usability, without compromising on power. Due to their modular structure, they are an ideal solution for small businesses requiring a versatile power management, as well large applications with multiple units, where they can revolutionize fleet efficiency.
What is an Energy Storage System
February 2, 2023
A battery energy storage system is a sub-set of energy storage systems, using an electro-chemical solution. In other words, a battery energy storage system is an easy way to capture energy and store it for use later, for instance, to supply power to an off-grid application, or to complement a peak in demand.
The impact of location on compressor selection
January 14, 2021
Depending on your region / country; mobile compressors have to comply to several types of regulations. Some examples: emission regulations (for example Stage V in Europe and Tier4Final in US), vessel regulations, road homologation, max sound levels and many more.
Select the right compressor for your application
January 14, 2021
Selecting the right compressor can be cumbersome as there are many factors to consider. A logistic start is your application that determins the required pressure, flow and air quality. But are you also considering your operation and organisation? Number of operators, working sites, utilization rate, required transport and storage can all determin which compressor is the best fit for your need.
How to select a centrifugal dewatering pump
February 12, 2021
Centrifugal pumps are versatile in their uses. These machines vary considerably in the technology that equips each one for a different set of jobs and circumstances. A careful choice is needed to ensure you optimally achieve your main dewatering objectives. Here are the key considerations to choose the right type of centrifugal pump for your application.
Improving Mean Time to Repair in High Head pumps
May 6, 2021
Through a series of design innovations, Atlas Copco has addressed traditional issues of inaccessible hydraulics and the need to disassemble pumps to perform simple tasks like replacement of consumables. In combination, these features can improve MTTR Mean time to repair up to 30%.
Understanding pump head and total head for pump performance
August 1, 2023
Head is the height at which a pump can raise fluid up and is measured in metres or feet. We use it when specifying centrifugal pumps because their pumping characteristics tend to be independent of the fluid’s specific gravity, often referred to as relative density.
How to extend your working day with construction site lighting
January 17, 2024
The day ends but your productivity remains. In this article, we clarify what you need to know when looking for suitable construction site lighting. You need to consider efficiency, safety and if required, anti-glare lighting and whether your light towers can adapt intelligently to the respective environmental conditions on the construction site.
Salt, sea, and stamina: reliable boat maintenance with Atlas Copco portable air compressors in coastal environment
September 15, 2025
In the demanding world of superyacht refits, reliability is everything. For Pendennis Vilanova, Atlas Copco’s portable air compressors are bringing precision, efficiency, and durability - even in the toughest coastal conditions.
Power Connect
November 3, 2025
Power Connect provides you split-second access to technical details of your portable compressor, generator, pump or light tower, making it easy to service and maintain your equipment. Thanks to Power Connect, you have full access to machine information. At your fingertips. 24/7.
Why battery-based hybrid energy storage solutions represent the future
November 24, 2025
Battery-based Energy Storage Systems used in conjunction with generators have dealt a major blow to the naysayers by combining higher levels of sustainability with more rapid return on investment (ROI) and low Total Cost of Ownership (TCO). A hybrid ESS solution will typically pay initial costs back in no more than two years.
Reliable air solutions for cement production
December 2, 2025
Cement plants need reliable compressed air for important tasks. These tasks include moving materials, controlling processes, and powering tools or machines. Atlas Copco’s air solutions are designed and tested to work well in this environment. They ensure high efficiency, uptime, and low overall costs. With a robust design and energy-saving technology, our compressors help keep cement production running smoothly, even under dusty and dirty conditions.
