Understanding PSI, PSIA, and PSIG

Basic Theory Atlas Copco Compressed Air Wiki Compressor Technique

If you regularly work with compressed air for industrial purposes, you are likely familiar with the term PSI. However, if you’re relatively new to the world of compressed air, this guide will help you understand the fundamental differences between PSI, PSIA, and PSIG, and how these measurements are applied in various industries.

Air compressors provide pressurized air for various industrial applications and needs. Pressure is measured in PSI and indicates the maximum pressure an air compressor generates. PSI is often in combination with the supply metric CFM (Cubic Feet per Minute).

However, multiple factors influence the air pressure measurements of an air compressor, including altitude and geographic location. We recommend seeking expert advice before attempting adjustments on your own to ensure optimal performance.

What is the difference between PSI, PSIA and PSIG?

PSI - Pounds per square inch

PSI is a widely used unit of pressure measurement that indicates the force exerted per square inch of an area. For instance, when inflating a car tire, PSI measures the air pressure inside the tire. PSI is specific to non-SI industrial and technical purposes such as tire pressure, fuel storage and distribution, and wastewater management. For example, an air compressor output rated at 500 PSI means it provides 500 pounds of pressure per square inch.

What is the difference between psi, psig, psia?

PSIA - Pounds per square inch absolute

Also referred to as total pressure, PSIA refers to pressure relative to zero or a perfect vacuum. In a vacuum, if a tire were empty of air, it would measure 0 PSIA.

PSIA measurement includes atmospheric pressure in its reading. At sea level, the atmospheric pressure is approximately 14.7 PSI, so a reading of 30 PSIA includes this atmospheric pressure.

PSIG - Pounds per square gauge

PSIG measures the pressure relative to the ambient atmospheric pressure. Unlike PSIA, PSIG does not account for atmospheric pressure. Therefore, PSIG is always lower than PSIA by the amount of ambient atmospheric pressure.

For instance, a vessel completely void of any air molecules at sea level would read roughly -14.7 PSIG, and ambient air pressure is always measured as 0 PSIG.

Calculations for PSI, PSIG, PSIA

Using these formulas, you can easily convert between PSIA and PSIG if you know the atmospheric pressure at your location.

PSIG is always lower than PSIA.

The formulas used to describe the relationship are:

PSIA = PSIG + 1 ATM
PSIG = PSIA - 1 ATM

(where ATM is atmospheric pressure)

Basic Theory Atlas Copco Compressed Air Wiki Compressor Technique

Understanding PSI, PSIA, and PSIG