Todo lo que necesita saber sobre el aire comprimido

Descargue gratuitamente nuestro manual del aire comprimido y encuentre las mejores recomendaciones para optimizar su instalación de aire.
manual del aire comprimido

10 pasos para una producción más verde y eficiente

Reducción de su huella de carbono para una producción más amigable con el medio ambiente - ¡todo lo que necesita saber!
green production

Todo lo que necesita saber sobre su proceso de transporte neumático

Descubra cómo puede crear un proceso de transporte neumático más eficiente.
3D images of blowers in cement plant

Optimice el flujo de aire mediante un controlador central

Nuestro controlador central más reciente, el Optimizer 4.0, estabiliza el sistema y reduce los costes de energía.
Optimizer 4.0 del compresor de aire
Cerrar

Regulating Air flow

Regulación del compresor Compresores de aire Compressed Air Wiki Regulación y control del compresor

In a lot of cases, applications require constant pressure in the compressed air system. This, in turn, requires that the compressed air flow from the compressor center is regulated. There are a number of flow regulation methods available.

What types of flow rate regulation systems are there?

there are different types of air flow regulation systems

As mentioned above, there are a lot of flow regulation methods available, depending on the type of compressor, acceptable pressure variations, air consumption variations and acceptable energy losses. Energy consumption represents approximately 80% of the total life cycle cost for compressed air, which means that the choice of a regulation system must be made carefully. This is primarily due to significant differences in performance broadly with regard to compressor types or manufacturers.

In an ideal case scenario, the compressor's full capacity could be precisely matched to its air consumption, for example, by carefully choosing the gearbox's transmission ratio (as this is something that is frequently used in process applications.) A number of applications are self-regulating, i.e. increased pressure creates an increased flow rate, and as a result, stable systems. Examples include pneumatic conveying systems, ice prevention, chilling systems etc. However, in most applications, the flow rate must be regulated. This is usually performed using regulation equipment that is integrated in the compressor.

There are two main groups of regulation systems:

Continuous flow rate regulation involves the continuous control of the drive motor or inlet valve according to variations in pressure. The result is normally small pressure variations (0.1 to 0.5 bar), depending on the regulation system's amplification and its regulating speed.

Load/unload regulation is the most common regulation method and involves the acceptance of somewhat larger variations in pressure between two limit values. This takes place by completely stopping the flow rate at the higher pressure (off-loading) and resuming the flow rate (loading) when the pressure has dropped to the lowest limit value. Pressure variations depend on the permitted number of load/unload cycles per time unit, but normally lie within the 0.3 to 1 bar range.

Learn more about regulating dynamic compressors.

Learn more about regulating displacement compressors.

Related articles

an illustration about regulation and control for the atlas copco wiki.

Regulación de los compresores dinámicos

23 febrero, 2022

Podemos tratar el aire comprimido de diferentes maneras, y se utilizan diversas herramientas en estos procesos. Obtenga más información sobre cómo regular el flujo de aire comprimido en los compresores dinámicos.