10 steps to a green and more efficient production

Carbon reduction for green production - all you need to know
10 steps to green compressed air production

Discover our solutions for wastewater treatment

We offer clean air technology that matches all your aeration needs. With high energy efficiency and low total cost of ownership.
Waste Water Treatment
Close

What are compressor transient losses and why do they matter?

Efficiency matters: compressor transient losses explained

There are 3 types of rotary screw compressors: fixed-speed, dual-speed, and variable speed drive (VSD). Compressor transient losses help explain the vast difference in energy efficiency between these 3 types.

What are compressor transient losses?

The term transient losses refers to the energy that a compressor consumes without producing usable air as it cycles between operational phases. It is a term that reflects energy waste. For a traditional fixed-speed compressor, these losses can add up to 20% of its total energy use. Dual-speed screw compressors experience only minimal transient losses. Variable Speed Drive compressors eliminate them almost entirely. 

What are transient losses?

Transient losses in fixed-speed vs dual-speed compressors

Atlas Copco transient losses

In this article we will look at the 2 compressor types for which transient losses are a factor: fixed-speed and dual-speed compressors. We will also explain why fixed-speed compressors can never meaningfully reduce transient losses, no matter how efficient they are. And we will show how dual-speed do succeed in significantly lowering this wasted energy.  

Transient losses in fixed-speed compressors

Transient losses are inherent to fixed-speed compressors. That's because they can only operate at 100% motor speed and because they cannot start against a system under pressure. 


Here’s why: 

  • At start-up: When the motor starts, the air/oil separator vessel must first fill up. Only when the compressor reaches a pressure of 4 bar, the minimum pressure valve opens and it starts supplying compressed air. Until that moment, all energy used to start the machine falls under transient losses. 

  • Full load: When demand is at its maximum, the compressor runs at optimal efficiency. No wasted energy here. 

  • Lower air demand: When demand lowers, a fixed-speed compressor goes into unload. This is when the motor runs at maximum speed without producing any air, a pure waste of energy. However, in the transition from load to unload, a fixed-speed compressor experiences additional transient losses. As the inlet closes, the air/oil separator vents to 1/2 bar. That’s because the compressor cannot start up again later while still pressurized. The term blow-off losses refers to the energy needed to produce this vented air. 

  • Shut-off and restart: When demand continues to stay low, a fixed-speed compressor will eventually shut off. When air flow picks up, the compressor must reboot, starting the transient loss loop all over again as well.  

Transient losses in dual-speed compressors

A dual-speed compressor reduces transient losses by double digits compared to fixed-speed units. That’s because it operates at a minimal speed during unload and because it can start against a system under pressure. 


Here's how it works: 

  • At start-up: Beginning with a completely empty compressor, a dual-speed compressor starts up much like a fixed-speed compressor. 

  • Full load: When demand hits its peak, the compressor runs at its maximum speed. No wasted energy, but also no real wins compared to a fixed-speed compressor. 

  • Lower air demand: When demand lowers, a dual-speed compressor also goes into unload. But while in unload, it runs at a minimum speed to significantly reduce energy waste. In addition, because a dual-speed unit can start under pressure, it minimizes blow-off losses as well. 

  • Shut-off and restart: A dual-speed compressor can start under pressure. This means it can reboot up faster and it requires less energy to do so than a fixed-speed compressor. 

The cost of compressor transient losses

This article explained the concept of compressor transient losses, why fixed-speed compressors experience them, and how dual-speed compressors reduce them. Because energy costs typically constitute 80% of the total cost of a compressor, this difference in efficiency has a big impact on operational costs.