Breaker and Hammer Air-Oil
Synthetic lubricant for handheld pneumatic tools
Safety Data Sheet MSDS / SDS
Download here
Synthetic lubricant for handheld pneumatic tools
Download here
All pneumatic tools require some oil in the air line to lubricate the inner moving parts and reduce the wear between them, cooling them and reducing friction. Percussion units (breakers, hammers) without oil cause strong wear on the piston and cylinder. Decades ago, compressors leaked so much oil that it was enough to lubricate hammers and breakers. But that does not happen anymore. Breaker & Hammer Air-Oil is a fully synthetic lubricant with excellent lubricating, rust-preventing and de-icing properties, especially developed for TEX pneumatic breakers and hammers, as well as DIP and DOP pumps, for a smooth continuous operation under extreme conditions.
| Method | Unit - Metric | Data | |
| Density at 15°C / 59°F | ISO 12185 | 1050kg/m³ | 140 oz/gal US |
| Viscosity at 40°C / 104°F | ISO 3104 | 24.3 cSt | |
| Flash point | ISO 2592 | > 100°C | > 212°F |
| Pour point temperature | ISO 3016 | -60°C | -76°F |
| Ice dissolving power at -20C/-4 F | Very good | ||
| Part Number | ||
| 250 ml | 8.5 US fl oz | 8099 0202 40 |
| 1l | 34 US fl oz | 8099 0202 36 |
| 5l | 1.32 US gal | 8099 0202 02 |
| 20l | 5.28 US gal | 8099 0202 15 |
| 200l | 52.83 US gal | 8099 0202 28 |
