Watch the how-to video and follow along these steps:
- Start by pressing the middle button on the left hand side of the screen, press enter to enter into general settings. Scroll down to eleven - thirty, stationary regeneration press enter.
- Press enter again
- Press up to turn on enable and press enter.
- Press X one time,
- Scroll down to 11 forty DPF Regeneration Mode press enter.
- Press enter again
- Press the up arrow for forced and press enter.
- Press X two times.
- Scroll down to seven thousand engine and press enter
- Press enter for seventy one forty.
- Press enter.
- Press the up arrow to turn on service regeneration and press enter.
- Press x button three times.
The engine is now ready to start.
Once the regeneration has been completed, when you power the controller off, all the settings go back to default.
