10 steps to a green and more efficient production

Carbon reduction for green production - all you need to know
10 steps to green compressed air production

Everything you need to know about your pneumatic conveying process

Discover how you can create a more efficient pneumatic conveying process.
3D images of blowers in cement plant
Close

ZB VSD brings 40% more efficiency to wastewater treatment plant

The wastewater from the Leverkusen Chempark, and its nearby households, is biologically biodegradable – but requires a constant supply of compressed air. This process is operated by Currenta and, since 2007, the aeration of the open basin has been carried out using centrifugal air blowers from Atlas Copco, which replaced the classic surface aerators.

Speed-controlled centrifugal air blowers operate around the clock

Job Nr.: 71519 Abschluss der 1. Baustufe der neuen Klaerbecken
Leverkusen Entsorgungszentrum Buerrig
Mann mit Bart: Wilfried Steuernagel (Betriebs Ing.), Mann mit blauer Jacke , Juergen Schiefers  (Betriebs Meister)
17.08.2007
Norbert Meier-Külschbach, who is responsible for the operation of the plant explained: “Bacteria can only maintain their activity for a few hours without oxygen. So a continuous supply is crucial.” Consequently, Currenta signed a maintenance agreement for five years with Atlas Copco and installed the remote maintenance system Air-Connect. Any malfunctions in the installation are reported to the central office at Atlas Copco immediately. They can access the control system externally or send a technician to the installation if needed.

Efficiency gains of 40% - and greater durability

Compressor room at Currenta
Efficiency gains of 40% – and greater durability Four ZB machines were installed, of which two or three operate around the clock, depending on the degree of contamination of the waste water, and the fourth one serves as a contingency reserve. “We are running 365 days a year in 24-hour operation,” The turbo blowers are oil-free single-stage, speed-controlled type ZB 160 VSD machines, which are controlled for energy optimization using the ES 130T higher level control unit. This separate control unit can also be retrofitted for existing installations. The motors have a contactless electromagnetic bearing system, which minimizes maintenance. The impeller is also mounted on the motor shaft itself; this omits the gear completely, allowing for outstanding efficiency, and does not require any extra lubricant, so that oil cannot get into the blower. Compared with conventional rotary lobe blowers, this new type of drive achieves a possible energy saving of 30-40%, which may even be significantly higher in individual cases.
Becken_Succes story_LP_4
According to a statement from Meier-Külschbach, Currenta also needs turbine technology because normal rotary lobe blowers can only provide 1 bar of overpressure. In the waste water treatment plant, the water depth and the special membrane pipe system on the bottom of the basin require a significantly higher pressure.
Becken_Success story LP_3

The compact design of the machines was also important to us, especially considering the construction situation in Uerdingen where we wanted to use new compressors and we wanted one supplier to provide the equipment for both locations.

Norbert Meier-Külschbach , responsible for the operation of wastewater treatment Leverkusen Chempark

Clean water. Swedish reliability Blowers Class 0 Centrifugal oil-free Oil-free Air Waste water treatment