Best air compressor spare parts in Egypt

Using non-genuine spare parts could result in major component failure, which would have financial impacts on your production. 

Whereas, the genuine spare parts do appear expensive in the beginning, but on the long run, they will prove much more cost-effective and gives you complete peace of mind.

In short, your compressor may be suffering in silence. In the long term, non-genuine spare parts, including lubricants, can be creating unseen damage to machinery, diminishing efficiency or, even worse still by affecting your air purity which in turn might result in end-product quality issues. The impact may not be immediate, although the effect on total lifecycle costs can be massive.

The simple truth is that only by using original spare parts can a compressor’s designed performance and efficiency be maintained for years of operation at the same level as when it was purchased. In that way, investment is not compromised and neither is the compressor’s quality output.

Most critical elements for the compressors are air filter, oil filter, and oil separator. They avoid damage or performance loss due to dust which causes following impact on your air compressor:

• Dirt between rotors and housing results in damage to the rotors, leading to less compressed air delivered and higher energy consumption.
• Dust reduces the lifetime of the compressor element, oil separator element and oil.
• Dust also damages bearings and bearing housing which in turn affect the compressor element and lead to element seizure.

Hence it is critical to keep away dust and dirt contamination with genuine compressor filters and separators. As per a thumb rule, an extra pressure drop of 25 mbar at the air inlet will reduce the compressor output with 2% and an additional pressure drop of 1 bar over the separator element will increase the power consumption with 7%.

The Atlas Copco genuine filters are designed to withstand high operating pressures, high dirt retention, and temperature resistance, and therefore ensures good performance with low energy consumption and safety to equipment.

Apart from the basic functions of lubrication and heat absorption, lubricants prevent pollution and early corrosion.  Risks of choosing the non-genuine oil for air compressors can reduce the equipment shelf life. This will also lead to the formation of sediments in the oil circuit and moving parts due to insufficient lubrication and thus there are chances that oil oxidation can corrode metal parts. The use of genuine fluids offers superior lubrication and protect equipment components. This reduces equipment breakdowns and perfects your machine’s performance.

Atlas Copco genuine compressor oil is a unique combination of premium quality base oil and specific amount of additives which makes it balance product. It covers many properties such as oxidation resistance, viscosity at low temperatures, and foam resistance, etc which ensure efficient working of your compressor. Genuine quality fluids last longer, which means less fluid replacement, decreased disposal costs, and less downtime during equipment maintenance. 

Line filters cartridge cannot be replaced with a non-genuine piece as it reduces filter efficiency and allows dust or dirt particles to penetrate the air network. This can cause a pressure drop and increased power consumption and may result in a higher total life cycle cost of the compressed air system.