Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.

Google Chrome

Mozilla Firefox

Safari

Microsoft Edge
australia
Close

High Pressure Booster Range

Boost your productivity.

Boost productivity. Maximize safety!

High Pressure booster

When we talk about high pressure boosters, we simply mean a compressor which enables you to step up the pressure of the primary feed air compressor. If you require air or nitrogen at any pressure between 69 and 345 bar (1000 and 5000 psi), Atlas Copco’s high-pressure boosters with unique in-house designed pumper block is the most efficient choice. They are designed to be transported to your point of work – no matter how remote the location.

 

Fill out the form below!

A booster for every application

A high pressure booster is never a stand-alone product but part of a set-up defined by the application. Depending on the requirements, the set-up can contain a combination of:

  • Required boosted pressure: defined by the combination of the booster with the output pressure of the feed air compressor (either 24 or 35 bar/350 or 500 psi)
  • Required dew point : a dryer can bring the dew point to -40°C/ -40°F
  • Type of gas: adding a nitrogen generator can change the compressed air of the feed air compressor to nitrogen gas.

The end result will be a high pressure gas (either air or nitrogen) up to 345 bar (5000 psi) and up to -40°C (-40°F) dew point.

B7-41 USL booster compressor

Serviceability

Our pumper block design is not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours.

Transportability

Our in-house pumper block design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer. With the weight as low as 2950kg, even demanding offshore applications experience no limitations.

Safety

Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components. It will also indicate when preventive maintenance is required, avoiding unexpected downtime.

High Pressure Booster Enquiry

✔︎ Valid Invalid number Invalid country code Too short Too long

By submitting this request, Atlas Copco will be able to contact you through the collected information. More information can be found in our privacy policy.