Green operation has traditionally not been the main objective for constructors. Cost-control and efficiency have, for a good reason, been guiding project planning and execution. However, growing awareness of the effects of global warming has put construction as well as other machine-heavy industries under the spotlight, leading to the introduction of tighter regulations, such as Stage V. Undoubtedly, the pressure to reduce emissions is high. Yet, at the same time, the need to improve operational efficiency is higher than ever. Fortunately, these two goals can go hand in hand. Many technologies that are already available target sustainability while delivering better efficiency and contributing to a lower total cost of ownership (TCO) than traditional alternatives.
Let’s look at power generation – an area primarily dominated by diesel generators. Here, the recent developments in high-density lithium-ion battery energy storage solutions provide operators a simple way of addressing sustainability by complementing the generator’s power with energy stored from renewable sources. Although the energy storage systems are not designed to replace a generator, they can facilitate smart load management, making generators more efficient, flexible, and quiet to operate. The technology helps operators address many of the challenges of remote construction sites where grid power is unavailable and city centre locations where noise limits are imposed.
Energy storage systems are also key in reducing the size of the generator required. Some common construction equipment, such as cranes, rely on a significant power surge to get started yet consuming little power for the rest of the shift, leading operators to choose an oversized generator to provide those few seconds of peak power. With li-ion battery energy storage systems, the batteries are used to meet the peak power requirement. When power requirements are lower, the generator will power the load during the rest of the time. By utilizing a hybrid solution, constructors can provide the required power but reduce the negative aspects of using an unnecessarily large generator, including excess emissions, black smoke, and noise.
Hybrid system: Energy storage system working in parallel with power generators
Atlas Copco’s ZenergiZe range is a concrete example of the benefits combining these two technologies can deliver. It means that a generator which is 40 percent smaller can be used, minimizing emissions. With a hybrid solution, operators can improve sustainability, cut costs and the battery system can also help extend the lifespan of the generator while optimizing its performance. Furthermore, during its lifecycle, a ZBP unit only emits 50 percent of the emissions of a standard standalone generator, saving approximately 100 tons of CO2 – the equivalent of planting 450 trees (assuming a tree life of 30 years). When used in island mode, CO2 savings can reach up to 100 percent if the unit is powered by renewable energy sources. Moreover, the Atlas Copco’s Energy Storage Systems ZenergiZe units are also lighter and more compact than traditional alternatives, yet able to provide over 12 hours of power with a single charge.
Another area where the introduction of complementary technologies can help reap great rewards, both in terms of increasing sustainability as well as reducing noise and the cost of operation, is light towers. They are an essential part of construction equipment, but most of the models in the market rely on diesel engine power, especially in remote locations. However, this does not need to be the case: electric-only models that use grid power, as well as li-ion battery-powered LED options, are offering the same performance as their diesel counterparts with the added benefits of reduced CO2 emissions, smaller refuelling costs, and quiet operation.
HiLight S2+ solar light tower
The latest HiLight S2+ solar light tower from Atlas Copco, for example, helps users cut CO2 emissions by up to six tonnes compared to traditional technologies. The renewable energy generated by its extensible solar panels enables autonomous operation during times when the yield is greater than the energy demand. However, during darker months or times of high-energy demand, the tower can be charged with any external power source such as energy storage systems. If this power is coming from renewable sources, the light towers offer a 100 percent green solution.
HiLight E3+ electric light tower
Another light tower that can help users cut CO2 emissions in very tough environments is the HiLight E3+ electric light tower. This plug-and-play light tower’s environmental resilience extends application opportunities, improves reliability, reduces total cost of ownership, and preserves resale values. Equally, though, they offer superior performance during operation. With no mechanical parts to maintain and no liquids or emissions, the HiLight E3+ light tower is environmentally friendly and virtually maintenance-free.
WEDA D70 submersible pump
Pumps are another piece of equipment found on most construction sites that can deliver significant savings, both in terms of CO2 emissions and TCO. Some environmentally conscious constructors are already taking advantage of the latest technologies to reduce the operational impact of the machines. Some manufacturers have introduced new and complementary technologies to make the use of pumps more efficient. Atlas Copco, for example, has made the Wear Deflector an integral part of the design of its WEDA D70 range of electric submersible dewatering pumps. The unique hydraulic design reduces the size of the pump by up to 40 percent while contributing to a high level of pump efficacy and long life, even in challenging operating conditions, resulting in a low TCO.
PAS HardHat dewatering pump
Digital technologies, such as Atlas Copco’s FleetLink, can help further improve monitoring and assist operators in working more efficiently. FleetLink enables remote monitoring of pump performance and condition, providing the operational insight needed to optimize pump usage and maintenance. Tools like this can help keep equipment in optimal condition and eliminate any excess emissions resulting from potential malfunction while ensuring a continuous, cost-effective operation. This telematics system is included in Atlas Copco’s PAS HardHat® Stage V dewatering pumps, empowering operators to reduce emissions because they are certified to work with HVO, the newest generation of biodiesel oil; to reduce the carbon footprint of the product itself.
As these examples demonstrate, introducing low-emission technologies to the construction site can be simple, and also work towards zero emissions operations. Reducing CO2 emissions is good for the planet as well as the brand image and customer relationships. By demonstrating awareness of the environmental impact of construction and, more importantly, the willingness to address it, forward-thinking constructors can shape the industry towards a more sustainable future. This change can also bring significant benefits to the business: renewable energy sources deliver low-cost or even free energy, while more energy-efficient machines tend to consume less power, be easier to move around, and emit less smoke and noise.
When the rewards of choosing greener technologies include improved operation, lower TCO, and a healthier workplace, introducing a greater level of sustainability to the construction site should be on the agenda for every business.
1 Αυγούστου 2022
Energy storage systems Energy storage system
As the world moves towards adopting renewable energy on a massive scale and discarding fossil fuels, many options are being investigated. A key factor in this transition to low-carbon energy is the adoption of
25 Μαΐου 2021
Atlas Copco’s ZenergiZe range is a good example of how the high-density...
1 Ιανουαρίου 2021
