View all our industries

Our industries

Time to calibrate?

Secure your quality and reduce defects through Tool Calibration and Accredited Quality Assurance Calibration.​
power tool calibration, tool testing, metrology, machine capability test

Momentum Talks

Discover inspirational and engaging talks on Atlas Copco
Momentum Talks
إغلاق

What is the optimal drill speed for different materials?

4 minute(s) to read نوفمبر 18, 2024


When drilling, selecting the right speed is essential for ensuring precision, avoiding damage, and maximizing tool lifespan. Whether you’re working with pneumatic or other drills, knowing how to match drill speed with different materials will greatly enhance your results. This guide will help you understand the nuances of optimal drill speeds and why it’s crucial for efficient drilling.

 

 

Aerospace drilling configurator
Discover our Drilling Configurator

Customize a drill tailored to your exact needs in just a few clicks

 

 

Why drill speed matters

The speed at which your drill bit rotates, measured in revolutions per minute (RPM), directly impacts the quality of your work. Drilling too fast or too slow can result in poor performance, damage to the material, and even shorten the lifespan of your drill bit or the drill itself. Understanding the characteristics of different materials and how they respond to varied drill speeds is key to achieving clean, precise holes.

You must determine your tool's appropriate power and free speed based on the material and the hole diameter you need to drill. The free speed is calculated using the material's specific cutting speed, which depends on its hardness.

Example: Let’s say you need to drill a hole in aluminum up to 3 mm. What power setting and speed would you select?

Answer: 6,000RPM & 200 - 350W

Chart How to select the right drill
Chart How the selection drill chart works

 

 

1. Metal drilling

Metals require a slower speed to ensure the drill bit doesn't overheat. The denser the metal, the slower the drill should spin. Lubrication is also crucial for metals to reduce friction and prevent the drill bit from dulling too quickly.

 

2. Drilling into composite materials

Composite materials, such as fiberglass or carbon fiber, combine multiple elements to create a stronger and more versatile substrate. However, drilling into composites requires special care to avoid fraying, delamination, or uneven cuts. Start at the lower end for thicker or denser composites and adjust as needed.

 

3. Drilling into wood

Wood is one of the most common materials worked on, but not all wood types require the same drill speed. Softwoods like pine can handle higher RPMs, while denser hardwoods like oak or maple need a slower speed to prevent burning or splintering.

 

 

Tips for improving drilling operations

  1. Check your drill’s manual: Most modern drills come with manuals that include recommended speeds for various materials.
  2. Use lubricants: When drilling metal, always use a lubricant to prevent overheating and extend the life of your drill bit.
  3. Drill bit matters: Ensure you’re using the correct drill bit for your material. For example, wood bits have a brad point, while metal bits are often high-speed steel (HSS) or cobalt for tougher jobs.

 

 

What happens if I use too high drilling speed?

When the drill bit cuts into a material, friction generates heat. Excessive heat from drilling at high speeds can harden the material, altering its characteristics. This leads to:

  • Faster dulling of the drill bit: The bit becomes blunt more quickly, necessitating frequent replacements.
  • Longer drilling time: Material hardening slows down the drilling process.
  • Reduced Drill motor lifespan: Prolonged drilling increases wear and tear on the motor.
  • Poor hole quality: incorrect drilling speed can cause hole inaccuracies. 

 

Conclusion

Matching the drill speed to your material is critical for efficiency, safety, and achieving clean results. Remember, slower speeds are best for hard materials, while faster speeds work well for softer substances. With the right knowledge, you can make drilling less of a chore and more of a precision task.

 

Discover our Drilling Configurator
Drilling configurator banner
Discover our Drilling Configurator
Customize a drill tailored to your exact needs in just a few clicks
 
Customize a drill tailored to your exact needs in just a few clicks
Customize a drill tailored to your exact needs in just a few clicks

 

 

Aerospace Drilling Pocket guide
To get the whole story behind the art of drilling holes in the aerospace manufacturing industry check this pocket guide
 
To get the whole story behind the art of drilling holes in the aerospace manufacturing industry check this pocket guide
To get the whole story behind the art of drilling holes in the aerospace manufacturing industry check this pocket guide
Drilling Solutions
7-shape
Drilling Solutions
Explore a wide range of Atlas Copco Drilling Solutions
 
Explore a wide range of Atlas Copco Drilling Solutions
Explore a wide range of Atlas Copco Drilling Solutions
Contact us
Contact us
Learn more about how Atlas Copco can optimize your drilling operations.
 
Learn more about how Atlas Copco can optimize your drilling operations.

 

 

Ready to drill down deeper? Discover more